Have a safe and happy BBQ season.

 

Emergency Procedures

Leak suspected – location uncertain

Check the entire system for ANY indication of gas leak, such as a smell or hiss. Test with soapy water solution, which will bubble at any point where gas escapes. Never use a match or flame to test. If a leak is found at a connection, re-make the connection and test again. If the leak has been indoors, fully ventilate the room before further use of the appliance. Do not interfere with any part of a fixed installation.

Leak detected – not on fire

  • If possible stop the leak by shutting the cylinder valve, and ventilate the area thoroughly until the air is clear.
  • If it is not possible to stop the leak, remove the cylinder carefully to a safe outdoor location. Keep the leak uppermost so that only gas and not liquid escapes.
  • Keep hands and face clear of any stream of escaping liquid.
  • If the cylinder cannot be removed, disperse gas with fine water spray and provide maximum ventilation.
  • Keep possible ignition sources at least 20 metres away until the cylinder is empty. These sources could include non-flameproof electrical appliances, camera flash, telephone, radio, vehicle engines, and any other equipment that can generate a spark

Keep possible ignition sources at least 20 metres away until the cylinder is empty. These sources could include non-flameproof electrical appliances, camera flash, telephone, radio, vehicle engines, and any other equipment that can generate a spark.

Leaking cylinder or appliance – on fire

  • If valve is undamaged, close if safe to do so and let the fire go out. Do not use again until inspected.
  • If valve cannot be closed, call the Fire Service and the LPG supplier if it is a fixed cylinder installation.
  • Advise the location of the cylinder or appliance, that it is LPG and the cylinder size.
  • If there is any possibility of cylinder(s) being engulfed by fire, evacuate the adjacent area.

Cylinder exposed to excessive heat

  • Keep cylinder cool with a water hose, sprayed from maximum possible distance.
  • Remove from heat source if possible and safe to do so.

Peace of mind with dependable fuel supply, when you need it

Our Business is Customer Satisfaction.